What can be put in place of the skirting board?

What can be put in place of the skirting board?

What can be put in place of the skirting board?

Alternatives to Skirting: 6 Materials You Didn't Think About

1. Tall white skirting board. ...
2. Steel skirting board. ...
3. Raw wood skirting board. ...
4. Stone skirting board. ...
5. Ceramic skirting board. ...
6. The return of the oak skirting board.

Why do you put the skirting board?

Protective, to protect the wall from kicks and abrasion; it also prevents the furniture from coming into direct contact with the wall. Decorative, that is, as a complementary decoration to window frames. Baseboards are generally made in two ways or better with two different materials, wood or plastic.

When should the skirting board be used?

The pose. The installation, which must be carried out at the end of the work, naturally after the laying of the parquet but also after the painting of the walls, takes place by gluing or nailing.

How should the skirting board be placed?

Thanks to their lightness, the MDF skirting boards can be fixed to the wall simply by means of double-sided tape; alternatively you can opt for a traditional installation with glue. Some models can be interlocked with clips fixed to the wall.

How to replace the skirting?

Start by separating the baseboard from the wall with a mason's chisel and a hammer. Then pry with the tip of the hammer. Place a wooden wedge against the wall to protect it. Insert a first wedge in this point and repeat the same operations a little further on.

How high should the baseboard be?

length. The standard length of a skirting board is never less than 2,4 meters and hardly more than 3 meters. height: the height of a skirting board is between 4 and 10 cm, even if standard skirting boards have a height between 6 and 8 cm.

Which skirting board to choose?

The wooden skirting board for the parquet must be chosen in the same shade as the floor: otherwise there is a risk of producing an annoying optical effect. If you prefer a parquet skirting board that gives more breath to the environment, you can opt for a classic white skirting board, if the wall is also white.

How to paint a baseboard?

To paint a skirting board it is not necessary to disassemble it: it will be enough to apply paper tape along the lower and upper edges that delimit the wall and the floor, so that the paint that eventually overflows will not stain the painting of the walls or worse still the paper to be painted. wallpaper that ...

How much does the installation of the baseboard cost?

The following table shows the indicative prices of skirting boards in different materials

How to choose the color of the skirting board?

-YES to the skirting board in the same color as the walls and the same material as the floor. This way it will stand out in the right amount. It is a safe aesthetic choice that will also make the rooms perceive as larger because it does not emphasize the perimeter.

How do you choose the color of the skirting board?

-YES to the skirting board in the same color as the walls and the same material as the floor. This way it will stand out in the right amount. It is a safe aesthetic choice that will also make the rooms perceive as larger because it does not emphasize the perimeter.

How do you put the wooden skirting board?

The installation of the wooden skirting board can be done in two different ways, by fixing it with dowels and screws or by using a specific glue. The two systems have differences, with small advantages and disadvantages. Screws and dowels allow you to remove the skirting board very easily in the future to replace it.

How to detach the skirting board without breaking it?

First we carefully insert the blade of a thin chisel between the wall and the skirting board and we leverage but slowly so as not to chip it. When, on the other hand, there is enough space between the wall and the skirting board, then we can insert a wooden wedge to use as a lever.

How to remove kitchen baseboards?

The magnetic system of Scilm allows you to remove the skirting easily. How? Using the special tool supplied, which releases it in a "blink", in the blink of an eye. And just as quickly the hoof returns to its place.

How should the color of the baseboard be?

-YES to the skirting board in the same color as the walls and the same material as the floor. This way it will stand out in the right amount. It is a safe aesthetic choice that will also make the rooms perceive as larger because it does not emphasize the perimeter.

How to renew the skirting board?

To paint a skirting board it is not necessary to disassemble it: it will be enough to apply paper tape along the lower and upper edges that delimit the wall and the floor, so that the paint that eventually overflows will not stain the painting of the walls or worse still the paper to be painted. wallpaper that ...

How to choose the height of the skirting board?

THE SKIRTING BOARD YOU KNOW - The skirting board is usually as long as the longest side of the floor tile, and with a variable height (usually) from 6 to 10 cm. The more you go towards the modern, the lower the skirting board is made, even reaching only 4 or 5 cm in height.

How to clean white wooden baseboards?

How to clean the baseboard

1. dust the skirting boards with a cloth as the first cleaning operation;
2. use the brush attachment of the vacuum cleaner;
3. clean the surfaces with soap and water;
4. tackle difficult stains with an acid solution such as vinegar, bleach or polish;

How to paint a ceramic skirting board?

To paint a skirting board it is not necessary to disassemble it: it will be enough to apply paper tape along the lower and upper edges that delimit the wall and the floor, so that the paint that eventually overflows will not stain the painting of the walls or worse still the paper to be painted. wallpaper that ...

How to recover a skirting board?

If your skirting board has cracked on the surface, you can avoid removing it from the wall and fixing it by leaving it where it is: just spread a little putty directly on the cracks, level it with a spatula and adjust its density with very simple vinyl glue.